exner-exstatic-310.jpg

Static Probe Holder

Porte-sondes statiques pour cuves et pipelines
 

EXstatic 310

EXstatic 310 G1 ¼ “thread for DN25 weld fitting

Static probe holder for permanent installations of Ø12mm / 120mm sensors on DN25 welding sockets in tanks or pipes. The frames are very easy to install and can be delivered with or without a protective cage. Fragile sensors, in particular glass sensors, are very well protected against mechanical influences.

Benefits

Designed according to hygienic criteria
Surface finish Ra <0.78 or Ra <0.37
AISI 316L / 1.4404 stainless steel
EPDM seals with FDA and USP VI approval
Optional sensor protection cage
Up to 10 bar and 140 ° C
Protective cap for cable connection

Support de sondes statiques 120mm EXner
 

EXstatic 311

EXstatic 311 TriClamp connection

Static sensor Holder for permanent installations of Ø12mm / 120mm sensors on tanks or pipes by TriClamp process connection. The fittings are very easy to install and can be supplied with or without a sensor protection cage. Fragile sensors, in particular glass sensors, are very well protected against mechanical influences.

Benefits

Designed according to hygienic criteria
Surface finish Ra <0.78 or Ra <0.37
AISI 316L / 1.4404 stainless steel
EPDM seals with FDA and USP VI approval
Optional sensor protection cage
Up to 10 bar and 140 ° C
Protective cap for cable connection

Support de sondes statiques EXner en 120mm
 

EXstatic 312

EXstatic 312 hygienic process connections

Static probe Holder for permanent installations of Ø12mm / 120mm sensors on tanks or pipes via hygienic process connections.
The fittings are very easy to install and can be supplied with or without a sensor protection cage. Fragile sensors, in particular glass sensors, are very well protected against mechanical influences.

Benefits

Designed according to hygienic criteria
Surface finish Ra <0.78 or Ra <0.37
AISI 316L / 1.4404 stainless steel
EPDM seals with FDA and USP VI approval
Process connections according to EHEDG / 3A
Optional sensor protection cage
Up to 10 bar and 140 ° C
Protective cap for cable connection

Porte-sonde statique EXner 312

EXstatic 315

EXstatic 315, 15 ° elbow process connection

The EXstatic 315 is a static probe holder with 15 ° process connection for the permanent installation of Ø12mm / 120mm sensors on tanks or pipes. TriClamp and hygienic process fittings such as Varivent and Neumo BioControl are available.
The EXstatic315 support bodies are very easy to install and the sensor is  housed and protected.

Benefits

Designed according to hygienic criteria
Surface finish Ra <0.78 or Ra <0.37
AISI 316L / 1.4404 stainless steel
EPDM seals with FDA and USP VI approval
Up to 10 bar and 140 ° C
Protective cap for cable connection
Process connection tilted at 15 °

Support de sondes statique incliné à 15° EXner
 
 

EXstatic 340

EXstatic 340 is a universal static probe holder in stainless steel or plastic for the permanent installation of Ø12mm / 120mm sensors in tanks or pipes, mainly in de ”NPT or 1” NPT sockets.
The frame is suitable for replacing American fixed-installation sensors. PH measurement points and other parameters can be adapted to modern European measurement technology.

Benefits

Replacement for US sensors with NPT thread
AISI 316L / 1.4404 / PVDF / PP stainless steel
EPDM / FPM (Viton) / FFKM (Kalrez) O'Rings
T ”or 1” NPT process connection
Optional sensor protection cage
Up to 10 bar and 140 ° C

Support de sonde universel filetage NPT EXner